IJ25 | IJ35-50 | IJ65-85 | IJ80-110

 

 

IJ-25

  1. Make sure the telephone line is plugged from the meter to the telephone jack
  2. From the ready screen, select Menu > Setup > OK
  3. Select Registration > OK
  4. Select Audit > OK
  5. Once the meter connects successfully to the server, the meter will display the account balance

^ Top of Page

 

 

IJ-35/40/45/50

  1. Make sure the telephone line is plugged from the base to the telephone jack
  2. On the main screen, select Supervisor and enter the Supervisor PIN
  3. Select 4) Setup > OK
  4. Select 8) Registration > OK
  5. Select 2) Audit > OK
  6. Once the meter successfully connects to the server, the account balance will display on the screen

^ Top of Page

 

 

IJ-65/70/75/85

  1. Make sure that the telephone line is plugged from the base (rear top right hand corner) to the telephone jack
  2. From the ready screen, press Next > Menu > 5) Recredit Services > OK
  3. Select 2) Audit > OK
  4. Once the meter successfully connects to the server, the current postage will display on the screen
  5. To view the account balance, press OK
  6. Select Home > Next > Menu > 3) Reports > OK
  7. Select 1) General Registers > OK
  8. Select Next and the second page will display with the account balance on the Funds line

^ Top of Page

 

 

IJ-80/90/110

  1. Make sure that the telephone line is plugged from the base (rear top right hand corner) to the telephone jack
  2. From the ready screen, select Menu > 2) Recredit Services > OK
  3. Select 2) Audit > OK
  4. Once the meter successfully connects to the server the current postage will display on the screen
  5. To view account balance, press OK
  6. Select Home > Menu > 5) Reports > 1) General Registers > OK
  7. The account balance is found on the Funds line

^ Top of Page

If you require additional assistance, please contact our Customer Service department at 1-800-661-0200 between the hours of 8:30am to 6:00pm EST